Home Products Online Quote Contact Us
 
Thermocouple Cables and wires, Thermocouple wires, Cables, Wires, Manufacturers, Exporters and Suppliers of Thermocouple, Thermocouple Single Pair Cable, Thermocouple Extension Cable
 
Energy Regulators
Stem Thermostat / Rod Thermostat / Capillary Thermostat
Technical / Industrial Ceramics Brass Spares For Heating Elements
Ceramics / Wires / Brass Hardware and Tube Fittings for Thermocouple
 
Product Range
Heating Elements, Electrical Elements Energy Regulators and Infinite
   Controls
Heating Elements, Electrical Elements Thermostat
Heating Elements, Electrical Elements Brass Spares for Heating    Elements
Heating Elements, Electrical Elements Technical Ceramics / Industrial    Ceramics for Heating  Elements
Heating Elements, Electrical Elements Wires , Brass Hardware, Tube    Fittings and Others Spares for    Thormocouples Industry
Heating Elements, Electrical Elements Technical Ceramics for    Thermocouples
Heating Elements, Electrical Elements Heating Elements
Heating Elements, Electrical Elements Industrial Heaters
Heating Elements, Electrical Elements Brass Compression Fittings
Heating Elements, Electrical Elements Thermocouple Cables and wires
Heating Elements, Electrical Elements Ceramics


 
  Home  Thermocouple Cables and wires
A thermocouple is a device consisting of two different conductors (usually metal alloys) that produce a voltage proportional to a temperature difference between either end of the pair of conductors. Thermocouples are a widely used type of temperature sensor for measurement and control and can also be used to convert a heat gradient into electricity.
Thermocouple Multipair Extension Cable
Thermocouple Cables and wires
UL Listed Subject 13 PL TC
Rated 105C 300 Volt
Flame Retardant
Passes IEEE 383 Flame Test
Passes VW-1 Flame Test
Sunlight resistant
Thermocouple Multipair Extension Cable
Overall Shield UL listed 300 v=Volt PVC insulated 105 °C
Thermocouple Cables and wires
Thermocouple Multipair Extension Cable: SD 1250
Product Features
UL Listed Subject 13 PL TC
Rated 105C 300 Volt
Flame Retardant
Passes IEEE 383 Flame Test
Passes VW-1 Flame Test
Sunlight resistant
   
Product Specifications of Thermocouple Cables
Thermocouple Cables Conductors: Solid thermocouple extension wire per ASTM E230 &ANSI MC96.1     20 AWG 0.8mm dia
 
Thermocouple Cables Calibrations available include: K, J, T, R, S, N.
Thermocouple Cables Insulation: Nominal 0.40mm flame retardant PVC
Color Code: Per ASTM E230 & ANSI MC96.1, numbered on positive conductor(other colors available)
 
Thermocouple Cables Construction: Twisted pairs
Thermocouple Cables Communication Wire: 22 AWG (.61mm) 7 strand copper insulated with nominal     0.38mm orange PVC (4 pair and larger)
 
Thermocouple Cables Cable Shield: 0.05mm aluminium/polyester tape, 25% overlap
Thermocouple Cables Cable Drain Wire: 20 AWG 7-strand tinned copper
Thermocouple Cables Outer Jacket: Flame retardant PVC with ripcord under jacket
Thermocouple Single Pair Cable
A large range of cables in all ANSI calibrations are available including:
Thermocouple Cables and wires
PP - PVC / PVC
PSP - PVC / Screen / PVC
TT - Teflon / Teflon
GG - Glass / Glass
and more
   
Steel Wired Armoured Thermocouple Extension Cable for Ex d Applications
Individual / Overall Shield Served Wire Armor UL listed 300 volt pvc insulated 105ºC
Thermocouple Cables and wires
UL Listed Subject 13 PL TC
Rated 105C 300 Volt
Flame Retardant
Passes IEEE 383 Flame Test
Passes VW-1 Flame Test
Sunlight resistant
Steel Wire Armoured Thermocouple Extension Cable
   
Steel Wire Armoured Thermocouple Extension Cable for Flameproof Applications
Thermocouple Cables and wires
Steel Wire Armoured Thermocouple Extension Cable: SD 1255
Individual or Overall Shield Served Wire Armour Single or Multipair cable for use in hazardous areas. Construction is as per Multipair PVC cable with the addition of galvanised steel wire ( 80% nominal covering ) and an outer jacket of flame retardant PVC.
Product Features
UL Listed Subject 13 PL TC
Rated 105C 300 Volt
Flame Retardant
Passes IEEE 383 Flame Test
Passes VW-1 Flame Test
Sunlight resistant
 
APPLICATIONS
Petrochemical Plants
Utilities & Industrial Plants
Thermocouple Circuits
Product Specifications
Conductors: Solid thermocouple extension wire per ASTM E230 & ANSI MC96.1 20 AWG, 0.81mm dia
 
Calibrations: K, J, T, R, S, N
Insulation: Nominal 0.40mm flame retardant PVC
Color Code: Per ASTM E230 & ANSI MC96.1, numbered on positive conductor (other colors available)
 
Construction: Twisted pairs
Individual Shield: 0.03mm aluminium / polyester tape, 25% overlap
Pair Drain Wire: 22 AWG 7- strand tinned copper
Communication Wire: 22 AWG (.61mm) 7 strand copper insulated with nominal 0.38mm orange PVC (4 pair and larger)
 
Cable Shield: 0.05mm aluminium/polyester tape, 25% overlap
Cable Drain Wire: 20 AWG 7-strand tinned copper
Inner Jacket: Flame retardant PVC with ripcord under jacket
Armor: Galvanized steel served wire, 80% nominal coverage
Outer Jacket: Flame retardant PVC with ripcord under jacket
Available in Solid 20AWG and 16 AWG Conductors in Single and Multipair configurations, all Calibrations.
PVC RIPCORD P
Thermocouple Cables and wires

This cable has a Figure 8 Rip Design for easy conductor separation. It is small and compact in size and is also flexible, flame retardant and economical in it’s construction.

Available in Solid 24 AWG conductors
Designed for continuous use at temperatures from –26°C to 105°C
 
Individual Insulation - Colour Coded
Construction - Parallel conductors bonded together.
APPLICATIONS
Temperature Sensors Test Facilities
Laboratories Transportation
Appliances Heating and Air Conditioning
   
PVC / PVC PP
Thermocouple Cables and wires

The least expensive jacketed extension wire insulation available. The PVC individual colour-coded conductors are insulated with 15 mils (nominal) of PVC, then parallel conductors are given a 20 mil PVC jacket. The jacket is easily striped for separation of insulated conductors for assembly.

Designed for continuous use at temperatures from –26°C to 105°C
 
Available In Solid or Stranded Conductors
24AWG, 20AWG & 16 AWG; 7x.2, 14x.2, 7x.3,
APPLICATIONS
Permanent Sensor Fabrication Laboratories
Test Facilities Short-run Extension Leads
   
PVC/SCREEN/PVC PSP
Thermocouple Cables and wires
Single & Multipair cables with an overall shield are constructed by insulating the single conductors with PVC. One conductor of each pair is numbered and twisted with its counterpart. The twisted pairs are cabled with an Insulated copper communications wire and the entire construction is wrapped with an aluminium/Mylar tape shield. A copper drain wire is applied under the extruded PVC jacket.
Continuous temperature rating of 105°C
Shielded construction provides noise protection.
Excellent moisture resistance; good chemical and abrasion resistance.
 
APPLICATIONS
General plant installation    
Available in Solid 20AWG and Stranded 7x.3, 14.2 in single pair, Multipair only 20AWG solid conductors.
TEFLON / TEFLON TT
Thermocouple Cables and wires
Colour-coded Teflon is extruded over each single conductor. The single Insulated conductors are laid parallel and insulated with an extruded jacket of Teflon.
Continuous temperatures up to 205°C
Intermittent temperatures -200°C to 260°C
APPLICATIONS
Power Generating Plants Petroleum Plants
Field Heat Treating    
Available in 30AWG, 24AWG, 20AWG Solid Conductors 7x.2, 7x.3 Stranded Conductors
GLASS TWIST STW
Thermocouple Cables and wires
A high temperature, high tensile strength, extra heavy fibreglass yarn is braided over each conductor. The insulated, colour-coded conductors are impregnated with a high-temperature modified resin and twisted to form a pair. This product construction does not include an overall jacket.
Designed for continuous use at temperatures to 648°C, intermittent use to 787°C
 
Good abrasion resistance.
Easily stripped and terminated.
Economically practical for shortduration applications.
   
APPLICATIONS
Homogenizing furnaces for billet pre-heating.
Furnace Temperature Surveys. Heat treating.
GLASS / GLASS GG HGHG
Thermocouple Cables and wires
Most popular and widely applied of all glass insulations. A colour-coded fibreglass braid saturated with a highperformance resin is used for insulation of the single conductors and jacket.
Designed for continuous use at temperatures to 510°C intermittent use 648°C
 
For continuous use to 650°C and 790°C intermittent use specify HGHG
 
Good moisture and chemical resistance; fair abrasion resistance.
 
   
APPLICATIONS
Heat treating. Glass & Ceramic Kilns. Foundries.
Extensive applications in aluminium processing.
Available in 40AWG, 30AWG, 24AWG, 20AWG Solid Conductors 7x.2, 7x.3, 7x.5 Stranded Conductors
REFRASIL / REFRASIL RR
Thermocouple Cables and wires
High temperature silica fibres are braided on the single conductors as well as the overall jacket. Because saturant is not used, this product is not recommended for abrasive applications. Each conductor as well as the overall jacket are braided with this high temperature yarn to provide maximum flexibility at extremely high temperatures. A tracer is braided into insulation for polarity and identification.
Designed for continuous use at temperatures to 982°C intermittent use to 1093°C
 
Not recommended for applications where insulation may be subject for abrasion.
 
   
APPLICATIONS
Furnace survey thermocouples
Heat treating
Available in 20AWG Solid Conductors
STAINLESS STEEL BRAIDING
Thermocouple Cables and wires
To provide increased strength and abrasion resistance all cables may be over braided in stainless steel.
AUTOCLAVE AC
Thermocouple Cables and wires
A unique construction designed to eliminate the ‘leakage path through wire’ often found in autoclave applications. 24 AWG solid conductors, colour coded and Teflon insulated are bonded together in a proprietary process eliminating the need for a conventional jacket.
 
  Calibration Tolerances   Extension Cable Type K Cables
  Extension Cables Type J   Extension Cables Type N
  Extension Cables Type T   Extension Cables RTD Connecting Cable
  Thermocouple Colour Code Connection Chart
  Extension Cables Type R S Compensating Cables
 
Back
 
Contact Us
PEENA TRADERS
(Factory Address)
27/28, Shailesh Industrial Estate No.02, Navghar Road, Vasai (E), Thane - 401210 Maharashtra, INDIA.
Tel.: +91-250-2393771
Mob : +91-9867302914
Fax: +91-250-2393772
Email id.: info@bhahk.com
website: http://www.bhahk.com
Manufacturers, Exporters and Suppliers of Quality Thermocouple Cables and wires
We are the leading manufacturers, exporters and suppliers of these products and serving our oversas clients from the countries like
South Africa, middle East, Australia, Uk and etc.
-----------------------------------------------------------------------------------------------------------------------------------------------------------

Simmerstats | Electric Elements | Technical Ceramics | Industrial Ceramics | Industrial Heaters | Heating Elements

Thermocouples | Thermocouple Wire | Energy Regulators
   
Copyright 2009 Peena Traders. All right reserved Site Developed By Renercon