The BHA Snap Action Thermostat regulates the temperature continuously by switching the power on and off after the achievement of the set temperature. The Snap Thermostat’s normally closed contacts opens on achieving the set temperature which closes again when the temperature will drop by the differential.
TECHNICAL SPECIFICATION
FUNCTION
:
Single pole closed contacts opens when the temperature is
reached
ELECTRICAL RATING
:
[UL & CUL] 125V ac 9A, 250V AC 6A [VDE] 250V AC 6A
Push on terminal (6.3 mm), M3 screw terminal or Phillips type connections are alternative.
DIMENSIONS
Length of control shaft and angle of terminal plates are depended on customer requirement.
Phillips type iron connection is also available.All dimensions are only for reference
APPLICATION
When properly employed, this thermostat is suitable for use in dry / steam iron, ironing machines, waffle maker, hot tray, electric stoves …etc..
